802.11a/g SDIO Module
The SDC-SSD30AG provides all key Summit hardware and software capabilities in a SDIO system-in-package (SiP) form factor. With a length and width of only 15 millimeters and a weight of 1 gram, the SDC-SSD30AG module is suitable for all ASDs, and especially ideal for small or lightweight devices. No other Wi-Fi® radio module can match the range, robust security, seamless mobility, and easy administration of the SSD30AG module.
Please review the below data sheets for complete device specifications.
Download SDC-SSD30AG Hardware Integration Guide (PDF) (version 3.2, 1/31/13)
|System Interface||1-bit or 4-bit Secure Digital I/O|
|Physical Interface||0.4 mm pitch QFN (Quad Flat No leads)|
|Antenna Interface||Pads for 2 dual-band antennas|
|Input Power Requirements||3.3 VDC ± 10% (core)|
|I/O Signaling Voltage||1.8, 2.6, or 3.3 VDC ± 10%|
|Typical Power Consumption (at maximum transmit power setting)||
|Operating Temperature||-30° to 70°C (-13° to 167°F)|
|Operating Humidity||10 to 90% (non-condensing)|
|Storage Temperature||-30° to 85°C (-22° to 185°F)|
|Storage Humidity||10 to 90% (non-condensing)|
|Maximum Electrostatic Discharge||4 kV|
|Length||15.0 mm (0.59")|
|Width||15.0 mm (0.59")|
|Thickness||2.6 mm (0.")|
|Weight||1.0 g (0.04 oz.)|
|Mounting||See the "SDC-SSD30AG Hardware Integration Guide" for more information.|
|Media Access Protocol||Carrier sense multiple access with collision avoidance (CSMA/CA)|
|Network Architecture Types||Infrastructure and Ad Hoc|
|Network Standards||IEEE 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i|
|Data Rates Supported||
|Regulatory Domain Support||
|2.4 GHz Frequency Bands||
|5 GHz Frequency Bands||
|2.4 GHz Operating Channels||
|5 GHz Operating Channels||
|Transmit Power Settings
Maximum transmit power will vary according to individual country regulations. All values nominal, +/-2 dBm
|Typical Receiver Sensitivity||
|Operating Systems Supported||
All specifications are subject to change without notice
From a user's perspective, the SDC-SSD30AG is an SDIO module. From a regulatory and certification perspective, the SDC-SSD30AG is the same core product (with identical radio performance) as the SDC-MSD30AG.
All ETSI, FCC, and Industry Canada certifications for the SDC-MSD30AG are applicable to the SDC-SSD30AG. Please review the SDC-MSD30AG certification information page for detailed information on existing certifications and how your organization can leverage them.
Additionally, Summit has secured Wi-Fi Alliance certification for the SDC-SSD30AG as a "Dependent Product" of the SDC-MSD30AG.
The SDC-SSD30AG is compliant with Cisco Compatible Extensions Version 4 (CCX V4). Contact Summit Support for information on how you can earn the Cisco Compatible seal for any device that uses the SDC-SSD30AG.
Click HERE for verification of CCX compliance for this product.
Like all Summit devices, the SDC-SSD30AG is fully compliant with European Union Directive 2011/65/EU or Reduction of Hazardous Substances (RoHS) as per our Declaration of Compliance.
If any additional information or guidance is required, please contact Summit's certification group via email or by telephone at 330.434.7929.