802.11g PCMCIA Card with Antenna Connectors
The SDC-PC20G provides all key Summit hardware and software capabilities in the time-tested PCMCIA (PC Card) form factor. As a result, the SDC-PC20G is ideal for integration into legacy application specific devices like portable data terminals, portable printers and medical devices.
Please review the below data sheets for complete device specifications.
|System Interface||16-bit PCMCIA Type II with 68-pin connector|
|Antenna Interface||0 dBi Gain Diversity Omnidirectional|
|Input Power Requirements||3.3 VDC +/- 10%|
|Typical Power Consumption (at maximum transmit power setting)||
|Operating Temperature||-30° to 85°C (-22° to 185°F)|
|Operating Humidity||10 to 90% (non-condensing)|
|Length||104 mm (4.1")|
|Width||54 mm (2.1")|
|Weight||43 g (1.5 oz)|
|Mounting||68 pin connector|
|Media Access Protocol||Carrier sense multiple access with collision avoidance (CSMA/CA)|
|Network Architecture Types||Infrastructure and Ad Hoc|
|Network Standards||802.11b, 802.11d, 802.11e, 802.11g, 802.11i|
|Data Rates Supported||
|Regulatory Domain Support||
|2.4 GHz Frequency Bands||
|2.4 GHz Operating Channels||
|Transmit Power Settings
Maximum transmit power will vary according to individual country regulations. All values nominal, +/-2 dBm
|Typical Receiver Sensitivity||
|Operating Systems Supported||
Note: All ETSI, FCC, IC, and MIC certifications for the SDC-CF10G are applicable to the SDC-PC20G
All specifications are subject to change without notice
From a user's perspective, the SDC-PC20G is a PCMCIA module. From a regulatory and certification perspective, the SDC-PC20G is the same core product (with identical radio performance) as the SDC-CF10G.
All ETSI, FCC, Industry Canada, and MIC (formerly TELEC) certifications for the SDC-CF10G are applicable to the SDC-PC20G. Please review the SDC-CF10G certification information page for detailed information on existing certifications and how your organization can leverage them.
Additionally, Summit has secured Wi-Fi Alliance certification for the SDC-PC20G as a "Dependent Product" of the SDC-CF10G.
The SDC-PC20G is compliant with Cisco Compatible Extensions Version 4 (CCX V4). Contact Summit Support for information on how you can earn the Cisco Compatible seal for any device that uses the SDC-PC20G.
Click HERE for verification of CCX compliance for this product.
Like all Summit devices, the SDC-PC20G is fully compliant with European Union Directive 2011/65/EU or Reduction of Hazardous Substances (RoHS) as per our Declaration of Compliance.
If any additional information or guidance is required, please contact Summit's certification group via email or by telephone at 330.434.7929.